Lunar Eclipse Path: Who Sees It, and Where to Look
A lunar eclipse doesn't have a narrow path the way a solar eclipse does. Anyone on the night side of Earth with the moon above the horizon sees it, at the same moment, which is roughly half the planet. So when people search "lunar eclipse path," they usually mean one of two things. The first is the map showing which parts of the world can see the eclipse. The second is the diagram showing the route the moon takes through Earth's shadow. This article explains how to read both, and how to tell whether the next one can be seen from your home.
Why a lunar eclipse has no path of totality
During a solar eclipse, the moon's shadow is small next to Earth. It sweeps across the surface in a band, and you have to be inside that band to see totality. We covered that in Solar Eclipse Path Map: How Much of the Sun You'll See.
A lunar eclipse works the other way around. Earth passes between the sun and the moon, and the moon moves into Earth's shadow. The thing being darkened is the moon itself, so anyone who can see the moon sees the same darkening. Your location doesn't change how much of the moon is covered. It only decides whether the moon is in your sky while the eclipse is happening.
That's why lunar eclipses only happen at full moon, when the moon sits opposite the sun. It's also why you can watch the whole thing from a backyard.
Reading a lunar eclipse visibility map
A lunar eclipse visibility map is a map of the world shaded into zones. The labels vary from source to source, but the zones mean the same thing.
- Entire eclipse visible. The moon is up from the first moment it touches the shadow until the last. This zone is centered on the point where the moon is straight overhead at mid-eclipse.
- Moonrise during the eclipse. The moon rises after the eclipse has begun. You catch the later stages, low in the east, often in twilight.
- Moonset during the eclipse. The moon sets before the eclipse ends. You see the early stages low in the west, often near dawn.
- Not visible. The moon is below the horizon for the whole event. This is the daytime side of Earth.
The curved edges between the zones are the lines where the moon rises or sets at each stage. If your home sits near one of those edges, the eclipse will be low on the horizon, and buildings or trees can block it. A clear view toward the east or the west matters more than anything else.
Same moment, different clocks
An eclipse happens at one instant for the whole world. What changes is the time on your local clock. One stage might be late evening for one viewer and the small hours of the morning for another. When you read eclipse times, check whether they're given in universal time or in your own time zone.
The moon's path through Earth's shadow
The other "path" is the moon's track through the shadow, usually drawn as a diagram of two circles with a line crossing them.
Umbra and penumbra
Earth casts two shadows:
- The penumbra is the outer, partial shadow. Only some of the sunlight is blocked there, and the dimming is subtle. Many people don't notice it at all.
- The umbra is the dark inner core. When the moon enters it, a dark bite appears on one edge and grows.
The diagram shows the moon's disk at several points along its route, from west to east through the shadow. How deep that route cuts decides what kind of eclipse it is.
Three kinds of lunar eclipse
- Penumbral. The moon passes only through the penumbra. The moon looks slightly shaded, and it's easy to miss.
- Partial. Part of the moon enters the umbra. A dark curved edge, the shape of Earth's shadow, covers some of its face.
- Total. The whole moon enters the umbra. Instead of disappearing, it usually turns copper or red. Sunlight bends through Earth's atmosphere and reaches the moon, after the atmosphere has scattered away most of the blue light.
A track that passes close to the center of the umbra gives a longer, darker totality. A track that just grazes the umbra gives a short totality, with one edge of the moon brighter than the other.
The stages, in order
Eclipse tables list the stages, often called contacts, in this order:
- The penumbral eclipse begins
- The partial eclipse begins, as the moon touches the umbra
- Totality begins (total eclipses only)
- Greatest eclipse
- Totality ends
- The partial eclipse ends
- The penumbral eclipse ends
If you can only step outside once, go near greatest eclipse. For a total eclipse, any time between the start and end of totality works.
Watching one
You don't need eclipse glasses for a lunar eclipse. You're looking at a full moon that's dimmer than usual, so it's safe to look at directly. Binoculars show the color and the shadow's edge well. A phone on a small tripod can capture the color better than you might expect.
Find a spot with an open view of wherever the moon will be. Check the weather a day ahead, because clouds are the usual reason people miss an eclipse.
How GridTicker helps with this
GridTicker is a live ticker that runs in any browser, so you can keep it on a spare screen or a TV. One of its feeds is about eclipses. For an eclipse of the moon in the next month, the card shows when and where to look if the moon is up for it at your home. It also shows a map of the half of the world that can see the eclipse, with your place marked on it. That's the visibility map described above, drawn for your home. The guide's section on the sky shows what the card looks like.
The feed is worked out for the place you set under Where you watch the sky from on the Space page. You turn it on for each screen under Space feeds. A separate moon feed shows tonight's phase, when the moon rises and sets, and the next full moon by its name.
You can also have the ticker tell you when it's time to go outside. The "eclipse can be seen from home" alert starts ten minutes before the moment and lasts twenty minutes. It takes over the screen and says which way to look and how high. You can switch it off on its own, and it shows only on screens where the eclipse card is switched on. The alerts section of the guide explains how it works.
To keep the next lunar eclipse in view, you can set up a strip at https://app.gridticker.com/signup.